: Experts Insights Amid Global Plastics Treaty Talks-660edba46bf43.jpg)
Bangkok, 6 March 2024: As Southeast Asian countries are moving towards addressing the urgent issue of plastic pollution, one policy instrument has gained increasing attention as a solution to tackle plastic leakage from its source. Countries like the Philippines, Indonesia, Singapore, and Viet Nam have taken initial steps to implement the Extended Producer Responsibility (EPR) principle, where producers and importers of plastics bear responsibility for improving product designs for sustainability and managing the end-of-life phase of their products.
Presently, more countries in the region are exploring the adoption of EPR into their legal frameworks, especially amidst ongoing discussions surrounding the Global Plastics Treaty. With the fourth session of the Intergovernmental Negotiating Committee (INC-4) slated for April in Ottawa, Canada, stakeholders are gearing up to advocate for strict, or less stringent, legally binding provisions concerning EPR systems.
As momentum grows, the Regional Knowledge Centre for Marine Plastic Debris (RKC-MPD) of Economic Research Institute for ASEAN and East Asia (ERIA) convened its Experts Working Group on Marine Plastic Debris in Bangkok (EWG) on March 6th, 2024, to deliberate on the potential implications of imposing EPR under the Global Plastics Treaty for the Association of Southeast Asian Nations (ASEAN) member states. The meeting served as a platform for experts to share insights into the challenges, opportunities, and best practices associated with EPR, fostering dialogue not only among themselves but also with representatives from the private sector and global stakeholders.
ERIA set the stage with Mr Michikazu Kojima, Senior Advisor, outlining various EPR schemes across the ASEAN+3 region. This included established systems in Japan and South Korea, along with emerging frameworks in development by Malaysia and Thailand. Mr Kojima highlighted challenges countries may face during the initial stages of EPR implementation, such as fluctuating market prices for plastic waste and limited collection and recycling infrastructure. However, he also emphasized the existence of measures to overcome these hurdles, citing examples of good practices from within and outside the region.
Ms Nguyen Hoang Phuong, Founder & Policy and Legislative Chief Consultant of e-Policy Consulting Limited provided insights into Viet Nam’s EPR implementation.
‘Recognizing the importance of our Đồng nát or waste collectors, Viet Nam adopts a “hybrid” approach, which involves both formal and informal sectors throughout the life cycle management,’ said Ms Nguyen.
Viet Nam’s hybrid economic model, institutionalized through the enactment of the Law on Environmental Protection 2020, assigns different responsibilities to producers for various products under EPR, including treatment and recycling responsibilities.
Similarly, Asst Prof. Dr. Panate Manomaivibool, a Lecturer at Mae Fa Luang University, shared Thailand’s progress in advancing EPR through the draft Act on Sustainable Management of Packaging. This proposed legislation aims to impose comprehensive responsibilities on enterprises, covering all phases of the plastic life cycle from upstream to downstream. Dr Manomaivibool also highlighted existing voluntary pilot programs initiated by the private sector, indicating their readiness for the forthcoming mandatory EPR model.
Delving deeper into Thailand’s voluntary EPR initiatives, representatives from three prominent companies shed light on the substantial role of the private sector in enhancing EPR implementation in the country.
In line with the circular economy principle, SCG Chemicals Public Company Limited is boosting the development of high value-added (HVA) products through its i2P (Ideas to Product) Center. Mr Pornchai Sangrungsri, the center’s manager, explained how his team was innovating green materials across different industries, ranging from packaging, automotive, medical products, to energy.
‘We’ve initiated the NetsUp project, dedicated to collecting discarded fishing nets from local communities and recycling it into high quality post-consumer recycled (PCR) resin,’ he revealed. ‘This resin will be further processed into marine materials and upcycled into new products like t-shirts.’
Following this, Ms Nattinee Netraumpai, Head of Corporate Affairs and Board of Director at Unilever Thailand, outlined the company’s commitment to realizing a waste-free world. Unilever employed innovations to its plastic packaging to reduce plastic use, enhance recyclability, and promote the use of recycled plastic content.
‘To ensure that recyclable plastic packaging waste circulates within a closed-loop system, Unilever is advocating for systematic change through EPR that will lead to better product design choices and higher recycling rates,’ she emphasized.
Aligned with these efforts, Thai private sectors jointly established the Public Private Partnership for Sustainable Plastic and Waste Management (PPP Plastic) to foster multistakeholder collaboration in addressing the plastic waste issue in Thailand. Dr Orathai Pongruktham, Taskforce Leader of PPP Plastic and Sustainability Project Manager at Dow Thailand Group, outlined pilot projects under the partnership aimed at sustainable waste management models, such as the Smart Recycling Hub.
‘Moreover, we are driving EPR development through the PackBack Project in collaboration with the Pollution Control Department of Thailand,’ she said. ‘This initiative has enabled the establishment of the EPR Thailand Roadmap and the implementation of an EPR sandbox model in three municipalities in Chonburi Province from 2021 to 2023.’
In acknowledging that EPR is not a one-size-fits-all solution, ASEAN countries stand to gain from global knowledge exchange on EPR implementation to tailor frameworks to their specific context. To facilitate this, the EWG meeting welcomed Dr Maarten Dubois, Sustainability & Circular Economy Director at Deloitte Consulting Belgium, to share regulatory developments in European EPR. Dr Dubois elaborated how combining EPR with waste segregation, eco-modulation, taxes, levies, and pay-as-you-throw policies for waste management could strengthen EPR implementation efforts.
Furthermore, Mr Ruben Bibas, an Economist from the Organisation for Economic Co-operation and Development (OECD), provided insights from the Regional Plastics Outlook, offering valuable information on current plastic flows and policy landscape in the ASEAN+3 region.
‘Building upon this comprehensive stocktaking exercise, we’ve formulated projections and policy scenarios to bolster action against plastic pollution in the region,’ Mr Bibas concluded, emphasizing the importance of informed policymaking and collaborative efforts in addressing this pressing issue.
Negotiations for the Global Plastics Treaty during the third session of the intergovernmental negotiating committee (INC-3) kept all options open, setting the stage for delegates to strive for consensus in the upcoming session in April. Guided by Prof. Dr. Agamuthu Pariatamby from the Jeffrey Sachs Center on Sustainable Development at Sunway University, the EWG delved into the EPR options outlined in the revised zero draft from the INC-3, examining its potential courses and alignment with existing global and regional policies on plastic waste management.
Dr Yasuhiko Hotta, Programme Director of Sustainable Consumption and Production at the Institute for Global Environmental Strategies (IGES) provided insights into the EPR options in the revised zero draft, highlighting the varying degrees of mandate across the four options. From the first option, which proposes a stronger mandate to establish a legal instrument related to EPR, to the fourth option, which encourages member states to consider EPR based on national circumstances and capabilities.
‘Regardless of the Treaty’s direction, it’s crucial to recognize that EPR is not the silver bullet to overcome plastic pollution. We need to resolve issues like free riders and stakeholder engagement to effectively implement EPR provisions under the Treaty,’ stated Dr Hotta.
In connection with the INC negotiations, Ms Chochoe Devaporihartakula, Programme Manager at IGES, underscored the institute’s involvement, highlighting their contributions during the third session in November last year. IGES actively participated in thematic webinars and side events focusing on national action plans and treaty progress monitoring, spotlighting ASEAN's strides in plastic waste management.
Additionally, Ms Devaporihartakula emphasized that IGES has provided input on realistic goals, data harmonization, capacity building, knowledge sharing, and local implementation in relation to the INC processes, reinforced by its collaboration with ERIA's Regional Knowledge Centre. She advocated for active, inclusive stakeholder dialogues through consultations and webinars, essential for developing a unified, comprehensive strategy to effectively address the global challenge of plastic pollution.
Research Associate
Bangkok, 6 March 2024: As Southeast Asian countries are moving towards addressing the urgent issue of plastic pollution, one policy instrument has gained increasing attention as a solution to tackle plastic leakage from its source. Countries like the Philippines, Indonesia, Singapore, and Viet Nam have taken initial steps to implement the Extended Producer Responsibility (EPR) principle, where producers and importers of plastics bear responsibility for improving product designs for sustainability and managing the end-of-life phase of their products.
Presently, more countries in the region are exploring the adoption of EPR into their legal frameworks, especially amidst ongoing discussions surrounding the Global Plastics Treaty. With the fourth session of the Intergovernmental Negotiating Committee (INC-4) slated for April in Ottawa, Canada, stakeholders are gearing up to advocate for strict, or less stringent, legally binding provisions concerning EPR systems.
As momentum grows, the Regional Knowledge Centre for Marine Plastic Debris (RKC-MPD) of Economic Research Institute for ASEAN and East Asia (ERIA) convened its Experts Working Group on Marine Plastic Debris in Bangkok (EWG) on March 6th, 2024, to deliberate on the potential implications of imposing EPR under the Global Plastics Treaty for the Association of Southeast Asian Nations (ASEAN) member states. The meeting served as a platform for experts to share insights into the challenges, opportunities, and best practices associated with EPR, fostering dialogue not only among themselves but also with representatives from the private sector and global stakeholders.
ERIA set the stage with Mr Michikazu Kojima, Senior Advisor, outlining various EPR schemes across the ASEAN+3 region. This included established systems in Japan and South Korea, along with emerging frameworks in development by Malaysia and Thailand. Mr Kojima highlighted challenges countries may face during the initial stages of EPR implementation, such as fluctuating market prices for plastic waste and limited collection and recycling infrastructure. However, he also emphasized the existence of measures to overcome these hurdles, citing examples of good practices from within and outside the region.
Ms Nguyen Hoang Phuong, Founder & Policy and Legislative Chief Consultant of e-Policy Consulting Limited provided insights into Viet Nam’s EPR implementation.
‘Recognizing the importance of our Đồng nát or waste collectors, Viet Nam adopts a “hybrid” approach, which involves both formal and informal sectors throughout the life cycle management,’ said Ms Nguyen.
Viet Nam’s hybrid economic model, institutionalized through the enactment of the Law on Environmental Protection 2020, assigns different responsibilities to producers for various products under EPR, including treatment and recycling responsibilities.
Similarly, Asst Prof. Dr. Panate Manomaivibool, a Lecturer at Mae Fa Luang University, shared Thailand’s progress in advancing EPR through the draft Act on Sustainable Management of Packaging. This proposed legislation aims to impose comprehensive responsibilities on enterprises, covering all phases of the plastic life cycle from upstream to downstream. Dr Manomaivibool also highlighted existing voluntary pilot programs initiated by the private sector, indicating their readiness for the forthcoming mandatory EPR model.
Delving deeper into Thailand’s voluntary EPR initiatives, representatives from three prominent companies shed light on the substantial role of the private sector in enhancing EPR implementation in the country.
In line with the circular economy principle, SCG Chemicals Public Company Limited is boosting the development of high value-added (HVA) products through its i2P (Ideas to Product) Center. Mr Pornchai Sangrungsri, the center’s manager, explained how his team was innovating green materials across different industries, ranging from packaging, automotive, medical products, to energy.
‘We’ve initiated the NetsUp project, dedicated to collecting discarded fishing nets from local communities and recycling it into high quality post-consumer recycled (PCR) resin,’ he revealed. ‘This resin will be further processed into marine materials and upcycled into new products like t-shirts.’
Following this, Ms Nattinee Netraumpai, Head of Corporate Affairs and Board of Director at Unilever Thailand, outlined the company’s commitment to realizing a waste-free world. Unilever employed innovations to its plastic packaging to reduce plastic use, enhance recyclability, and promote the use of recycled plastic content.
‘To ensure that recyclable plastic packaging waste circulates within a closed-loop system, Unilever is advocating for systematic change through EPR that will lead to better product design choices and higher recycling rates,’ she emphasized.
Aligned with these efforts, Thai private sectors jointly established the Public Private Partnership for Sustainable Plastic and Waste Management (PPP Plastic) to foster multistakeholder collaboration in addressing the plastic waste issue in Thailand. Dr Orathai Pongruktham, Taskforce Leader of PPP Plastic and Sustainability Project Manager at Dow Thailand Group, outlined pilot projects under the partnership aimed at sustainable waste management models, such as the Smart Recycling Hub.
‘Moreover, we are driving EPR development through the PackBack Project in collaboration with the Pollution Control Department of Thailand,’ she said. ‘This initiative has enabled the establishment of the EPR Thailand Roadmap and the implementation of an EPR sandbox model in three municipalities in Chonburi Province from 2021 to 2023.’
In acknowledging that EPR is not a one-size-fits-all solution, ASEAN countries stand to gain from global knowledge exchange on EPR implementation to tailor frameworks to their specific context. To facilitate this, the EWG meeting welcomed Dr Maarten Dubois, Sustainability & Circular Economy Director at Deloitte Consulting Belgium, to share regulatory developments in European EPR. Dr Dubois elaborated how combining EPR with waste segregation, eco-modulation, taxes, levies, and pay-as-you-throw policies for waste management could strengthen EPR implementation efforts.
Furthermore, Mr Ruben Bibas, an Economist from the Organisation for Economic Co-operation and Development (OECD), provided insights from the Regional Plastics Outlook, offering valuable information on current plastic flows and policy landscape in the ASEAN+3 region.
‘Building upon this comprehensive stocktaking exercise, we’ve formulated projections and policy scenarios to bolster action against plastic pollution in the region,’ Mr Bibas concluded, emphasizing the importance of informed policymaking and collaborative efforts in addressing this pressing issue.
Negotiations for the Global Plastics Treaty during the third session of the intergovernmental negotiating committee (INC-3) kept all options open, setting the stage for delegates to strive for consensus in the upcoming session in April. Guided by Prof. Dr. Agamuthu Pariatamby from the Jeffrey Sachs Center on Sustainable Development at Sunway University, the EWG delved into the EPR options outlined in the revised zero draft from the INC-3, examining its potential courses and alignment with existing global and regional policies on plastic waste management.
Dr Yasuhiko Hotta, Programme Director of Sustainable Consumption and Production at the Institute for Global Environmental Strategies (IGES) provided insights into the EPR options in the revised zero draft, highlighting the varying degrees of mandate across the four options. From the first option, which proposes a stronger mandate to establish a legal instrument related to EPR, to the fourth option, which encourages member states to consider EPR based on national circumstances and capabilities.
‘Regardless of the Treaty’s direction, it’s crucial to recognize that EPR is not the silver bullet to overcome plastic pollution. We need to resolve issues like free riders and stakeholder engagement to effectively implement EPR provisions under the Treaty,’ stated Dr Hotta.
In connection with the INC negotiations, Ms Chochoe Devaporihartakula, Programme Manager at IGES, underscored the institute’s involvement, highlighting their contributions during the third session in November last year. IGES actively participated in thematic webinars and side events focusing on national action plans and treaty progress monitoring, spotlighting ASEAN's strides in plastic waste management.
Additionally, Ms Devaporihartakula emphasized that IGES has provided input on realistic goals, data harmonization, capacity building, knowledge sharing, and local implementation in relation to the INC processes, reinforced by its collaboration with ERIA's Regional Knowledge Centre. She advocated for active, inclusive stakeholder dialogues through consultations and webinars, essential for developing a unified, comprehensive strategy to effectively address the global challenge of plastic pollution.
Research Associate
